JZ Machtech - nr Watford
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
nberry
- DDK Seasoned Poster
- Posts: 20
- Joined: Mon Nov 14, 2005 5:03 pm
- Location: Cambridge
JZ Machtech - nr Watford
Dear All,
Just bought a '72 911E and this my first post. Looking through the pile of invoices etc. that came with it there was a lot of work done in the past by Machtech. Does anyone have any views on them - it needs a bit of bodywork updating and I was thinking of taking it back to them since they are as close to Cambridge as I can find, unless anyone can recommend someone nearer?
Nigel.
Just bought a '72 911E and this my first post. Looking through the pile of invoices etc. that came with it there was a lot of work done in the past by Machtech. Does anyone have any views on them - it needs a bit of bodywork updating and I was thinking of taking it back to them since they are as close to Cambridge as I can find, unless anyone can recommend someone nearer?
Nigel.
-
Ian Donkin
- DDK rules my life!
- Posts: 1306
- Joined: Wed Sep 29, 2004 9:07 pm
- Location: A Southern Northerner
Welcome Nigel - nice choice of motor
.
Unless they have changed recently, I'm pretty sure JZ focus on the mechanicals (and have a good reputation for this).
I'm sure others more local to you can comment on their experiences with body shops.
Enjoy the car.
Unless they have changed recently, I'm pretty sure JZ focus on the mechanicals (and have a good reputation for this).
I'm sure others more local to you can comment on their experiences with body shops.
Enjoy the car.
2006 RHD 997 Carrera (but DDK remains in my heart - also now no longer)
1972 LHD 2.4T with '73 2.4T CIS motor - gone to a new DDK home
1994 RHD 993 Carrera - gone!
1968 LHD 911L - was the Wife's but now in new hands
#1252
1972 LHD 2.4T with '73 2.4T CIS motor - gone to a new DDK home
1994 RHD 993 Carrera - gone!
1968 LHD 911L - was the Wife's but now in new hands
#1252
-
tanick
- I luv DDK!
- Posts: 813
- Joined: Fri May 14, 2004 10:29 am
- Location: Hertfordshire
-
lewis
- DDK above all
- Posts: 197
- Joined: Tue Feb 24, 2004 4:06 pm
- Location: luton
- Contact:
My 912 is booked in to Mactec on wednesday for an Mot and to be lowered a little they have a really good reputation and as everthing in life you get what you pay for, just hope they dont find to much wrong. to lower the car is around £250 and full geometry set up another £300 with the MOT dont expect much change out of £1000 but it may be morebut they're not cheap
68 912
-
veryporky
- DDK forever
- Posts: 718
- Joined: Wed May 11, 2005 5:40 pm
- Location: Cambridge - ish
I hope they do a better job than when my mate took his 944 turbo there for brake work. Perhaps they just get confused by the sight of a water pumper!!!
A place which I have good local reports on is Autostrasse in Coggershall Essex (01376 562922). Also a bit nearer to Cambridge.
Might just know a good local body shop too.
Drop me a PM if you want Nigel, I'm just down the road from you.
A place which I have good local reports on is Autostrasse in Coggershall Essex (01376 562922). Also a bit nearer to Cambridge.
Might just know a good local body shop too.
Drop me a PM if you want Nigel, I'm just down the road from you.
Keith
-
mallen282
- DDK Seasoned Poster
- Posts: 24
- Joined: Thu Sep 22, 2005 12:22 pm
JZM
JZM market themselves as a porsche specialist - they tend to get the job done but normally at a significant cost....Porsche centre Hatfield used them up until recently to work on Older cars that they did not have the time / space / expertise to work on.....so they obviously do an excellent job
. My expereince has lead me to feel that they offer a Rolls Royce product for Rolls Royce money and no matter whether you can prove it or not most garages replace items that may not necessarily require renewal or replacement. JZM always normally replace parts (genuine) as "we can afford it" ! If you start being specific, fussy or suply ur own parts & especially if ur car is not that special or you don't have loads of cash you'll get a slightly different service!
Sometimes you can provide the Parts yourself (PCGB members normally gets 10% from official Porsche dealer - Hatfield do)
Nigel - I've sent you a PM.
Regards
Sometimes you can provide the Parts yourself (PCGB members normally gets 10% from official Porsche dealer - Hatfield do)
Nigel - I've sent you a PM.
Regards
Mark.
'72 2.4E
'93 968CS (track day special) Now gone to heaven!!!
'72 2.4E
'93 968CS (track day special) Now gone to heaven!!!
-
mallen282
- DDK Seasoned Poster
- Posts: 24
- Joined: Thu Sep 22, 2005 12:22 pm
JZM
JZM market themselves as a porsche specialist - they tend to get the job done but normally at a significant cost....Porsche centre Hatfield used them up until recently to work on Older cars that they did not have the time / space / expertise to work on.....so they obviously do an excellent job
. My expereince has lead me to feel that they offer a Rolls Royce product for Rolls Royce money and no matter whether you can prove it or not most garages replace items that may not necessarily require renewal or replacement. JZM always normally replace parts (genuine) as "we can afford it" ! If you start being specific, fussy or suply ur own parts & especially if ur car is not that special or you don't have loads of cash you'll get a slightly different service!
Sometimes you can provide the Parts yourself (PCGB members normally gets 10% from official Porsche dealer - Hatfield do)
Nigel - I've sent you a PM.
Regards
Sometimes you can provide the Parts yourself (PCGB members normally gets 10% from official Porsche dealer - Hatfield do)
Nigel - I've sent you a PM.
Regards
Mark.
'72 2.4E
'93 968CS (track day special) Now gone to heaven!!!
'72 2.4E
'93 968CS (track day special) Now gone to heaven!!!
-
roger
- DDK slapper chatter
- Posts: 454
- Joined: Mon Mar 08, 2004 11:06 pm
- Location: The brussel fields (Bedfordshire)
Nigel
When you say the bodywork needs updating - do you mean repairing!
I know an excellent body guy north of sandy which is not a million miles from you. My 914's there at the moment. Let me know of you want contact details.
Regards
When you say the bodywork needs updating - do you mean repairing!
I know an excellent body guy north of sandy which is not a million miles from you. My 914's there at the moment. Let me know of you want contact details.
Regards
Roger -
1971 Gilbern Invader Mark II
1956 Terrot 125 EMS
2015 Skoda Octavia Estate
1971 Gilbern Invader Mark II
1956 Terrot 125 EMS
2015 Skoda Octavia Estate
-
Andre
- DDK Fanatic
- Posts: 66
- Joined: Tue Dec 06, 2005 12:28 pm
- Location: Surrey
Personally never had a problem with JZMachtech, can only give a recomendation here.
'89 2.5 944 Turbo
'91 3.0 944 S2 (For Sale - only 61K and like new!)
'87 3.2 Carrera
'95 3.6 993 Turbo (Sold)
'72 2.7 RS Spec (Sold)
'01 3.2 Boxster S (Sold)
'87 3.2 Carrera (Sold)
'00 3.2 Boxster S (Sold)
'70 2.2 911T (Sold)
'91 3.0 944 S2 (For Sale - only 61K and like new!)
'87 3.2 Carrera
'95 3.6 993 Turbo (Sold)
'72 2.7 RS Spec (Sold)
'01 3.2 Boxster S (Sold)
'87 3.2 Carrera (Sold)
'00 3.2 Boxster S (Sold)
'70 2.2 911T (Sold)
-
Nick Moss
- Nurse, I think I need some assistance
- Posts: 9424
- Joined: Sat Nov 08, 2003 6:59 pm
- Location: East Sussex
- Contact:
-
lewis
- DDK above all
- Posts: 197
- Joined: Tue Feb 24, 2004 4:06 pm
- Location: luton
- Contact:
just got my 912 back from JZ went in for suspension drop plus service, as I have never worked on an aircooled engine before just wanted it checked over by someone that knows what they are about.
Failed the MOT on warped rear Drums (thought Ihad discs all round
)didnt get the suspension drop I wanted they said it would be a waste of time as I have to do the brakes. In total they had the car for two weeks, it runs very well now, had a very large bill and got the distinct impresion that they just could not be bothered :
: . Recomendations for a local specialist would be most welcome. Will be doing the brakes myself.
lewis
lewis
68 912
-
veryporky
- DDK forever
- Posts: 718
- Joined: Wed May 11, 2005 5:40 pm
- Location: Cambridge - ish
-
Lightweight_911
- Nurse, I think I need some assistance
- Posts: 17954
- Joined: Wed Nov 12, 2003 10:48 pm
- Location: Worcs/W Mids border
-
Berny
- Put a fork in me, I'm done!
- Posts: 1647
- Joined: Fri Nov 21, 2003 9:58 pm
- Location: Suffolk
- Contact:

