oil pressure 4 bar without engine running?

For classic Porsche 911 content

Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin

Post Reply
User avatar
cschmueck
DDK Fanatic
Posts: 54
Joined: Mon Dec 08, 2014 10:43 am
Location: Irthlingborough, Northamptonshire

oil pressure 4 bar without engine running?

Post by cschmueck »

Hi all,
first run of the year. My oul pressure shows 4 bar with ignition on, engine not yet started. After starting the engine, the oil pressure maxes out with an audible click for the first 3 or 4 minutes.
Has anyone on here had something similar?
911T 1972
MGB 1970
NSU Lambretta 1954
DKW 110 1968
SeanP
I luv DDK!
Posts: 856
Joined: Thu Sep 06, 2012 11:59 pm
Location: North West Essex

Re: oil pressure 4 bar without engine running?

Post by SeanP »

Check your engine ground strap
Pull the wire off of the sender. What does the gauge do? Short the wire to the engine block. What does the gauge do.
If the engine ground strap is ok then replace the sender
1966 912
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s
Post Reply