Hello chaps,
Has anyone found it necessary to trim down the rear light seals? Just got round to fitting the original light units and when fitting the Porsche supplied grey rubber seals, the lenses protrude a little more than I'd like. I've looked at photos etc and the lense appears to sit flush with the panel.
If anyone can share their experiences I'd be most grateful.
Many thanks
Rear light seals
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
Loz
- DDK slapper chatter
- Posts: 445
- Joined: Wed Oct 24, 2012 11:28 pm
- Location: Kent
Rear light seals
1970 911t Coupe 2626
"I've started so I'll finish"
"I've started so I'll finish"
-
Gary71
- Nurse, I think I need some assistance
- Posts: 10694
- Joined: Wed Mar 31, 2004 1:27 pm
- Location: Cheshire
- Contact:
Re: Rear light seals
Get shaving!
I had to cut about 1/2 of the seal away to get mine to sit right. It’s a bit fiddly but worth it
I had to cut about 1/2 of the seal away to get mine to sit right. It’s a bit fiddly but worth it
-
stretch
- Me and DDK sitting in a tree! KISSING
- Posts: 2891
- Joined: Thu May 21, 2009 2:54 pm
- Location: Kent
Re: Rear light seals
Ditto. Got the finger sander on mine.!
70T barn find...... to ST.
1998 C2 996 Kettle
1998 C2 996 Kettle
-
Loz
- DDK slapper chatter
- Posts: 445
- Joined: Wed Oct 24, 2012 11:28 pm
- Location: Kent
Re: Rear light seals
Thanks Gary, I thought it must be the seals.
1970 911t Coupe 2626
"I've started so I'll finish"
"I've started so I'll finish"
-
Loz
- DDK slapper chatter
- Posts: 445
- Joined: Wed Oct 24, 2012 11:28 pm
- Location: Kent