Does domed sump plate fit over 964 oil pump?

[RobFrost]

Does anyone know if the standard domed oil sump cover fits over a 964 oil pump when retrofitted to an early engine (2.2 case)?

https://www.design911.co.uk/p/porsche-9 ... 010190200/

[RobFrost]

It doesn't



Sent from my SM-S918B using Tapatalk

[911hillclimber]

Will your original strainer from the engine fit the 964 pump?

[BILLY BEAN]

I used an Aluminium billet sump plate on my 2.4 ( to 2.7) build for a later oil pump. Pelican have one which clears a 993 pump which may do the job. Purchased my sump plate in the UK but so long ago can't remember where I purchased it from.

[BILLY BEAN]

Something like this should accomodate a later oil pump.

Sent from my SM-S921B using Tapatalk

[Nine One One]

This is one for sale, but overly expensive, but states it is for a 964 pump fitted to a 911
https://www.9products.com/product/6640/ ... sump-plate

https://rennlist.com/forums/911-forum/9 ... plate.html


That appears to be the same one Design 911 sell (if they actually have it in stock!) but there is no underside picture?
https://www.design911shop.com/p/engine- ... gLmNfD_BwE

Looking at the Design 911 one, and then comparing it to the LN Engineering one, they are identical even down to the three machined fins either side of the sump plug, it is just solid alloy, with no recess underneath for the strainer - you can see the sump plug threads run the depth of the extra extension, so basically just a solid piece with fins machined in it - so the Design 911 is not suitable (though they will probably tell you it is)

[RobFrost]

I used an Aluminium billet sump plate on my 2.4 ( to 2.7) build for a later oil pump. Pelican have one which clears a 993 pump which may do the job. Purchased my sump plate in the UK but so long ago can't remember where I purchased it from.

993 is the same as 964, I understand. It might be the same design but aluminium instead of the magnesium 964 one.

Sent from my SM-S918B using Tapatalk