its been a while since I updated so I thought Id post a few pics. Firstly can I give a big thanks to Richard 'Moggy' Morgan for kindly pressing my new bearings in to my trailing arms for me. Cheers Richard I own you one:-).
Front headlights are in as are the motors
Front washer assembly is in and Ive fitted a couple of the air boxes at the front. I wont do the centre blower till I start to put the dash in so I can fit the cable pulls properly. I wanted to leave that as late as possible but I suspect Ill have to put the dash in and protect it in some way.
Bits and bobs in the cabin main thing is the centre tunnel (hateful thing) now has all the cables and brake line fed through ad connected
Engine bay starting to take shape (focussing on the brake lines, nearly finished them in there. Ive also assembled the engine lid obviously not putting that on till a lot later.
Finally the trailing arms, and rear suspension are on, including brake assembly. Callipers are temporary Ill change them out. These are the ones I had refurbished a couple of years ago and they are quite shocking, Ive only used them to get the brake lines the right length.
So thats my front and rear suspension finished, most of the brakes done... next - mmm good question, I think Im going to get my front wiring loom out and start to run that through and connect the front components. Not sure if theres a more sensible order but if anyone can spot anything obvious feel free to let me know:-)
Happy with progress Im cracking on again so alls good.
Cheers
Andrew
))