Indicator bulb in dash

[womble912]

Hi Folks,

Could anyone tell me how to change the light bulbs in the speedo for the indicators?

Many thanks

Womble

[hot66]

Pull out the speedo, at the rear will see the bulb holders which have an interference fit with the bulb, just pull out the relevant bulb and replace

[Lightweight_911]

Your gauges (if originals) are held in the dash by means of metal clamps secured by knurled nuts.

You access these from within the front compartment (after removing the full-width cover over the heater, etc).

It might be easier to change the bulb(s) without removing the gauge (I can't remember how inaccessible it is as it's a while since I owned a '69 or earlier car).

[hot66]

What year car is it? Can't tell on tapatalk

[Lightweight_911]

It doesn't say James but all 912's had the earlier style gauge fitting

[neilbardsley]

Hi I did this recently. Open the bonnet and undo the carpeting, via the strap, in front f the gauges then you can just pull out the bulb directly from the back of the gauge. No need to remove the gauges.

I've posted a photo on another thread of what the rear of my gauge looks like if that helps

[womble912]

Thank you everyone sorted!