New Steel Wheels

Replica owners or enthusiasts are very welcome

Moderator: Bootsy

Post Reply
shambly
DDK slapper chatter
Posts: 484
Joined: Fri Nov 28, 2003 1:03 pm
Location: Wiltshire

New Steel Wheels

Post by shambly »

My speedster is currently running chrome sprintstar wheels with spinners, and 165/80 tyres.

I had to part with the wide-5 steel wheels that I used to run on my speedster when I sold our split-screen camper van. They'd found there way onto that to allow proper rated tyres to fit at the rear as the 356 replica wheels the camper was on when I bought it had insufficient offset to allow this. (They were wide-5 mangels 5.5" rims with the usual offset of 15; the wheels i'd had on my speedster had a special-order (from CSP at the time) offset of 25, giving a valuable 10mm additional clearance at the rims. I had planned to put widened original 15" bus wheels on the van but the company I entrusted widening too had them for more than a year without managing the task.... and the bus was sold in the meantime...

So I'm bringing back as hand carry from the states some 45 offset wide-5 4.5x15 rims from Beck. I'm hoping that with my existing 165/80 tyres they'll give me that nice tucked in look.
Thinking of having them refinished in ivory, with polished drum skinz beneath :-)
Should contrast the black bodywork nicely.

I'll post some before and after photos when done.

Simon
mdmax72
Put a fork in me, I'm done!
Posts: 1512
Joined: Thu Sep 28, 2006 8:23 pm
Location: midlands u.k

Re: New Steel Wheels

Post by mdmax72 »

I know a good Powder coater that gets into all the nucks & granies of the wide five's.

Bloody hell, how big is your bag :roll: your putting them in as hand luggage???
Rich

DDK Member 0547

Evolving Speedster Build ;-)
shambly
DDK slapper chatter
Posts: 484
Joined: Fri Nov 28, 2003 1:03 pm
Location: Wiltshire

Re: New Steel Wheels

Post by shambly »

I should have said checked luggage (doh!) but I've got them home safe and sound. They didn't even raise an eyebrow at check-in though of course TSA unpacked them and repacked them (for once, they repacked them as they found them rather than their usual poor effort)

I'm going to try a wheel refinisher in Basingstoke who fixed one of my C30 wheels for me when I ran it down a kerb a while ago. They have dealt with wide-5 steels before and had people bringing wheels to them from a reasonable distance away.

Simon
Anta
Married to the DDK
Posts: 267
Joined: Sat Jun 25, 2011 10:23 pm
Location: Sutton Coldfield

Re: New Steel Wheels

Post by Anta »

mdmax72 wrote:I know a good Powder coater that gets into all the nucks & granies of the wide five's.

Bloody hell, how big is your bag :roll: your putting them in as hand luggage???

Hi

I am also in the midlands and just about to get some wide 5s coated...would you mind telling me who you used please? Many thanks Ant.
Carrera 2.7 MFI 1974
Taycan 2022
993 C2 Coupe 1996 - SOLD
912 Coupe 1968 - SOLD
550 Spyder - SOLD
mdmax72
Put a fork in me, I'm done!
Posts: 1512
Joined: Thu Sep 28, 2006 8:23 pm
Location: midlands u.k

Re: New Steel Wheels

Post by mdmax72 »

Pm sent, were in the midlands are you??
Rich

DDK Member 0547

Evolving Speedster Build ;-)
Anta
Married to the DDK
Posts: 267
Joined: Sat Jun 25, 2011 10:23 pm
Location: Sutton Coldfield

Re: New Steel Wheels

Post by Anta »

mdmax72 wrote:Pm sent, were in the midlands are you??
Apologies for late reply, been travelling, cheers for the coater tip.

I am in Sutton Coldfield, how about you?

Spyder is having some surgery at the moment, new screen, converting to CSP Wide 5s and some silencers before I get an ASBO. Just the weather for it, 10" of snow!
Carrera 2.7 MFI 1974
Taycan 2022
993 C2 Coupe 1996 - SOLD
912 Coupe 1968 - SOLD
550 Spyder - SOLD
Post Reply