Chesil Speedster bodyshell wanted
Moderator: Bootsy
-
Frankster
- DDK Newbie
- Posts: 16
- Joined: Mon Sep 17, 2012 3:36 pm
Re: Chesil Speedster bodyshell wanted
I tried to contact Gary today, top bloke...
Last edited by Frankster on Sat Sep 29, 2012 8:12 am, edited 1 time in total.
-
oliver365
- DDK slapper chatter
- Posts: 463
- Joined: Sun Oct 25, 2009 8:25 am
- Location: cheshire
Re: Chesil Speedster bodyshell wanted
dont know but I got a good hood off him ! you checked out his website ?
-
mdmax72
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: Chesil Speedster bodyshell wanted
Something else to think about is are you going through the Iva or not once built??? Not going to go into the details other than Chesil build there's to meet Iva and Gary doesn't...
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
-
Frankster
- DDK Newbie
- Posts: 16
- Joined: Mon Sep 17, 2012 3:36 pm
Re: Chesil Speedster bodyshell wanted
Guys, from one simple post about a body shell wanted, I can't believe how helpful you've all been! I have loads of pics from my chassis build so once I've learnt how to use this forum I will upload a build
Last edited by Frankster on Sat Sep 29, 2012 8:08 am, edited 1 time in total.
-
shambly
- DDK slapper chatter
- Posts: 484
- Joined: Fri Nov 28, 2003 1:03 pm
- Location: Wiltshire
Re: Chesil Speedster bodyshell wanted
No legal methods to avoid IVA unless you go with long wheelbase chassis.Frankster wrote:I am keen to learn more about the NON IVA test registration etc.....
There are those, i believe, who use old logbooks with very simple descriptions on them and clone the original car or just leave the logbook as was but you have to consider the consequences if there was a serious accident involving your vehicle...
-
stevesprite
- DDK above all
- Posts: 184
- Joined: Sat Jul 10, 2004 4:21 pm
- Location: Cornwall
Re: Chesil Speedster bodyshell wanted
Sounds like a bit of a can of worms has been re opened !!!!
I managed to get mine registered with my local DVLA as a built up vehicle, about a year before the SVA/ IVA started to include speedsters. I believe it was a grey area back then, but I understand that it is pretty cut and dried now ?????
That said, I see there are a couple of dealers selling new speedsters on Ebay that dont appear to have gone through IVA. Like I said can of worms !!!!
I managed to get mine registered with my local DVLA as a built up vehicle, about a year before the SVA/ IVA started to include speedsters. I believe it was a grey area back then, but I understand that it is pretty cut and dried now ?????
That said, I see there are a couple of dealers selling new speedsters on Ebay that dont appear to have gone through IVA. Like I said can of worms !!!!
Last edited by stevesprite on Thu Sep 27, 2012 11:26 pm, edited 1 time in total.
Pilgrim "California" Speedster
-
Del
- DDK forever
- Posts: 594
- Joined: Wed Aug 08, 2007 8:58 am
- Location: Leicester
Re: Chesil Speedster bodyshell wanted
He is often under a car or not within earshot of the phone ringing, so you have to just keep trying I'm afraid.Frankster wrote:I tried to contact Gary today, but phone went to voice mail..... Any tips? Also what facilities does Gary have?
Facilities? I'd say he has all the facilities needed to supply anything from the components you need to make your own car in kit form to all the facilities he needs to supply a complete turnkey car. Only facility he hasn't got is someone to answer the phone
-
shambly
- DDK slapper chatter
- Posts: 484
- Joined: Fri Nov 28, 2003 1:03 pm
- Location: Wiltshire
Re: Chesil Speedster bodyshell wanted
Their workaround - which I should have also mentioned - is to title the car in the USA in a friendly state as an original 1957 Porsche and then bring it into the UK on the back of that title.stevesprite wrote:Sounds like a bit of a can of worms has been re opened !!!!
That said, I see there are a couple of dealers selling new speedsters on Ebay that dont apear to have gone through IVA. Like I said can of worms !!!!
Again, not sure I'd want to do that....
-
Frankster
- DDK Newbie
- Posts: 16
- Joined: Mon Sep 17, 2012 3:36 pm
Re: Chesil Speedster bodyshell wanted
Del wrote:He is often under a car or not within earshot of the phone ringing, so you have to just keep trying I'm afraid.Frankster wrote:I tried to contact Gary today, but phone went to voice mail..... Any tips? Also what facilities does Gary have?
Facilities? I'd say he has all the facilities needed to supply anything from the components you need to make your own car in kit form to all the facilities he needs to supply a complete turnkey car. Only facility he hasn't got is someone to answer the phone![]()
-
stevesprite
- DDK above all
- Posts: 184
- Joined: Sat Jul 10, 2004 4:21 pm
- Location: Cornwall
Re: Chesil Speedster bodyshell wanted
Their workaround - which I should have also mentioned - is to title the car in the USA in a friendly state as an original 1957 Porsche and then bring it into the UK on the back of that title.
Again, not sure I'd want to do that....[/quote]
Does that mean they would be MOT exempt as well, due to them being pre 1960 ????
Again, not sure I'd want to do that....[/quote]
Does that mean they would be MOT exempt as well, due to them being pre 1960 ????
Pilgrim "California" Speedster

