Attaching horn grilles

[ger]

Hi Folks,

Any tips on attaching the horn Grilles?

The studs are short and tiny.....Fine for a steel body but no use on my fiberglass kit. Any idea what size the studs are, M3 too big....

Cheers
Gerry

[ger]

ordered up some m2 and m2.5 bolts.....

[Del]

Gerry, are you using the rubber horn grilles under them too? They look much better with them and stop the paint from scratching too.

[ger]

Yep, have the rubbers as well.......

Still trying to determine thread size

Working away this week, another go at the weekend

[Del]

you should be able to unscrew the studs from the horn grille and take them to a decent old fashioned ironmongers type place that sells nuts and bolts individually and pick some that fit. I dont know the size as mine are already fitted. Careful when you put the studs back in as the grilles are really soft and if you over tighten it will show a dimple on the other side.

[mdmax72]

Ger if you pm me your address I'll post you some cap screws that l used for mine. A small donation to the ddk charity thingy will cover the costs