Hi All
I am after a picture of an impact bumper A post area showing where the wiring passes through for its electric mirrors please, can anyone help me out?
Thanks Bill.
Door post .
Moderators: hot66, Miggs, 58A - 71E, impmad2000, drummerboytom, Barry, Helen, Viv_Surby, Derek, KS, abm914, Mike Usiskin
-
Dakota
- DDK forever
- Posts: 586
- Joined: Thu Oct 25, 2007 10:46 pm
- Location: SE London under a rusty car
Door post .
I am a person of simple pleasures so if you don't have any simple pleasures to offer me, beer, pizza or Porsche bits etc kindly leave me be, XX.
-
Nick Moss
- Nurse, I think I need some assistance
- Posts: 9424
- Joined: Sat Nov 08, 2003 6:59 pm
- Location: East Sussex
- Contact:
-
Dakota
- DDK forever
- Posts: 586
- Joined: Thu Oct 25, 2007 10:46 pm
- Location: SE London under a rusty car
Hi Mr Moss
the area I need to see is the section between the "A" post and the flitch panel as I need to know where where to put the wiring for electric door mirrors, why, because its a seventy five and has never had electric mirrors before, poor old thing. I have mirrors and wiring etc from an SC that was backdated but would prefer to put it back as close to as it left the factory as possible as its a very early RHD Turbo but its not my choice.
thanks Bill.
the area I need to see is the section between the "A" post and the flitch panel as I need to know where where to put the wiring for electric door mirrors, why, because its a seventy five and has never had electric mirrors before, poor old thing. I have mirrors and wiring etc from an SC that was backdated but would prefer to put it back as close to as it left the factory as possible as its a very early RHD Turbo but its not my choice.
thanks Bill.
I am a person of simple pleasures so if you don't have any simple pleasures to offer me, beer, pizza or Porsche bits etc kindly leave me be, XX.