Fusch wheel question

912uk · Post by **912uk** » Thu Jan 12, 2006 12:28 pm

Hi guys on one of my 4.5" rims it has a small kerb dent. I want to get these polished so can you get the rim rebuilt up ege welding to grind it back and get it polished!! what's the make up content of the rims??

Alan @ CanfordClassics · Thu Jan 12, 2006 12:49 pm

If you get it welded, you can not get it anodised it as it will show up.

912uk · Post by **912uk** » Thu Jan 12, 2006 10:10 pm

right so you can polish them.

bugger I was thinking about anodising as well.. nice and original.

Polish will have to be it then

cubist · Post by **cubist** » Thu Jan 12, 2006 11:43 pm

I'll take it for scrap... £5 ok?

912uk · Post by **912uk** » Mon Jan 16, 2006 11:17 pm

£6 and it's a deal

veryporky · Post by **veryporky** » Tue Jan 17, 2006 12:03 am

If it's not too deep wouldn't that come out when they cut the outer rim during the refurb

912uk · Post by **912uk** » Tue Jan 17, 2006 12:20 am

Yes I think your right Ihad another look at the rim and it was not as bad as I remebered so I think I will go with it as it will be only a minor fault..