Not a desperate need at all but I acquired a spare 1970 engine and it came without the rear crossmember and the four bolt bracket which holds that to the back of the engine below the fan pulley. It'd be handy to have one on the engine rather than to swap it, if anyone has something they don't want/need lying around.
I think it's the same one right up to the mid eighties, but not the one with the pivot and the shock absorber.
Sent from my SM-G988B using Tapatalk
Engine bar and bracket wanted
Moderator: Miggs
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2066
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
Engine bar and bracket wanted
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
- KS
- Nurse, I think I need some assistance
- Posts: 14961
- Joined: Fri May 07, 2004 3:12 pm
- Location: Cornwall
Re: Engine bar and bracket wanted
I have a bar but not the bracket.
-
- DDK slapper chatter
- Posts: 471
- Joined: Tue Apr 08, 2008 4:29 pm
- Location: Cape Town, South Africa
Re: Engine bar and bracket wanted
I would double check that they haven't changed - i suspect the mounting bar is unchanged, but the cradle may well have as the engines changed?
Magnus
1972 3.2 RS lightweight. Still a bit scary...
1987 3.2 Carrera. Sold..
1972 Alfa 1750 GTV. Sold...
1971 911E in Silver. So lovely, sold..
1971 911S. sold....
1972 BMW CSL. Stupidly sold...
1968 Land Rover SIIa SWB..rusted in half...
1972 3.2 RS lightweight. Still a bit scary...
1987 3.2 Carrera. Sold..
1972 Alfa 1750 GTV. Sold...
1971 911E in Silver. So lovely, sold..
1971 911S. sold....
1972 BMW CSL. Stupidly sold...
1968 Land Rover SIIa SWB..rusted in half...
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2066
- Joined: Thu Jul 08, 2021 8:18 am
- Location: Lichfield
Re: Engine bar and bracket wanted
Both now sourced. Thanks all.
Sent from my SM-G988B using Tapatalk
Sent from my SM-G988B using Tapatalk
1970 911T, Signal orange (Restoration thread)
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.
1988 3.2 Carrera backdate, Black
2001 996 Turbo, Lapis blue (am I allowed to put that here?)
I'm looking for a pre-impact bumper 911S or other high-revving 911 to restore - please let me know if you see one.