Page 1 of 1
My knob came off!
Posted: Thu Jul 21, 2022 3:01 pm
by gridgway
My gearknob came off in my hand! There is nothing to hold the knob on other than electrical tape being wound round the gearstick. I assume this is not the normal method attachment. But on the basis that I don't know what's normal, can anyone advise please? It looks like the gearstick has been cut down to me, but I know nothing!
IMG20220712125615 by
graham Ridgway, on Flickr
Re: My knob came off!
Posted: Thu Jul 21, 2022 3:07 pm
by Nine One One
From about 37 secs
You should have a crush washer that expands and grips as the knob is pushed downwards onto the upright.
https://www.youtube.com/watch?v=eaSM_KBOOGA
Re: My knob came off!
Posted: Thu Jul 21, 2022 3:37 pm
by yoda
This discussion topic could go in all sorts of directions …….
Re: My knob came off!
Posted: Thu Jul 21, 2022 3:55 pm
by gridgway
Mega, thanks! I'll look for a new crush washer then! I have a nice wooden knob somewhere. Does it need to have the metal tube insert to work? I think it's all wood
Re: My knob came off!
Posted: Thu Jul 21, 2022 3:56 pm
by Lightweight_911
.
New crush sleeves are available from the likes of Type 911, Roger Bray, etc...
- alternative names are gear knob 'retainer', 'tolerance ring' etc ...
.
Re: My knob came off!
Posted: Thu Jul 21, 2022 4:01 pm
by gridgway
Thanks Andy, like this then...
https://type911shop.co.uk/epages/de867c ... ducts/4803
"Gearknob Retainer Inner Sleeve"
Re: My knob came off!
Posted: Thu Jul 21, 2022 4:06 pm
by gridgway
The trouble with type911 is that a £7.20 part that weighs a few grams costs £7.20 to ship! Hey ho
Re: My knob came off!
Posted: Thu Jul 21, 2022 5:03 pm
by Lightweight_911
.
Try your OPC - you might find it's cheaper to pick one up ...
.
Re: My knob came off!
Posted: Thu Jul 21, 2022 5:09 pm
by gridgway
good point!
Re: My knob came off!
Posted: Thu Jul 21, 2022 8:07 pm
by Berny
The old crush tube may be in the old knob
Re: My knob came off!
Posted: Thu Jul 21, 2022 8:17 pm
by gridgway
I will check my old knob but it was held on with some electrical tape and was very loose indeed when I removed the tape, so I suspect no crush tube
Re: My knob came off!
Posted: Fri Jul 22, 2022 6:46 pm
by neilbardsley
I have tape on mine too. I would like to get this washer too. However, will the knob come off after this washer has been inserted?
Sent from my M2004J19C using Tapatalk
Re: My knob came off!
Posted: Fri Jul 22, 2022 7:09 pm
by gridgway
That video linked up the way shows how to get the knob off
Re: My knob came off!
Posted: Wed Jul 27, 2022 3:24 pm
by Dougieboy1
at the risk of diverting attention from the matter in hand, here is something that may make you laugh when thinking about things that fell off......
https://www.youtube.com/watch?v=3m5qxZm_JqM
Re: My knob came off!
Posted: Wed Jul 27, 2022 4:01 pm
by gridgway
That (and the others) are very funny!