Thanks for the replies - set the PSI to 3 - would not go any higher so will bypass the pressure gauge / filter tomorrow. Couple of videos of the engine running between 1500 1800 RPM
Untitled by ghia70, on Flickr
Untitled by ghia70, on Flickr
Thanks
Danny
popping and spitting Solex carbs
Re: popping and spitting Solex carbs
1968 912
1970 Karmann Ghia
1960 LI 125 Lambretta
1970 Karmann Ghia
1960 LI 125 Lambretta
Re: popping and spitting Solex carbs
Have you checked the carb mounting flanges for straightness? Those might be warped due the overthightening and cause a leak which might be hard to spot
Re: popping and spitting Solex carbs
Start from the beginning
Valves
Timing
Carbs
Have you tried it without the linkages attached to the carbs? You could be slightly off kilter with them and it could be holding the carbs slightly open.
Valves
Timing
Carbs
Have you tried it without the linkages attached to the carbs? You could be slightly off kilter with them and it could be holding the carbs slightly open.
1966 912
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s
1969 912/6 hotish rod in build
1974 914 Dead
LI 125 Lambretta (Yeah right it’s a 125)
Mini Cooper s