newbee from Grantham/Peterborough - speedster clinic 356
Moderator: Bootsy
-
- DDK Seasoned Poster
- Posts: 38
- Joined: Mon Aug 27, 2012 10:57 am
- Location: Near Peterborough
newbee from Grantham/Peterborough - speedster clinic 356
Brought this a couple of months back, but have been busy working on my splitty for a friends wedding. Quick blow over, she doesn't look too bad.
Anyway, wedding done, thought I would crack on. Ordered a few parts from the states (just waiting for the gauges now) and am starting to tackle the electrics.
Thought I would also do some work on the running gear.
Anyway, wedding done, thought I would crack on. Ordered a few parts from the states (just waiting for the gauges now) and am starting to tackle the electrics.
Thought I would also do some work on the running gear.
Re: newbee from Grantham/Peterborough - speedster clinic 356
Look good
one little thing the fuse box is designed to be mounted to os front inner tub
one little thing the fuse box is designed to be mounted to os front inner tub
Re: newbee from Grantham/Peterborough - speedster clinic 356
welcome newone lookin gud
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: newbee from Grantham/Peterborough - speedster clinic 356
Welcome, is this one bought on eBay via Gary the other month. If so good bargin.
So that's were my milkmans crates have gone
So that's were my milkmans crates have gone
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
-
- DDK Seasoned Poster
- Posts: 38
- Joined: Mon Aug 27, 2012 10:57 am
- Location: Near Peterborough
Re: newbee from Grantham/Peterborough - speedster clinic 356
Thats the one. trying to do a few hours every now and then, but progress is slow.
Any pics on where the fuse board should sit? Happy for any hints/tips as learning as I go.
Next on the list of parts to buy, windscreen & frame.
Any pics on where the fuse board should sit? Happy for any hints/tips as learning as I go.
Next on the list of parts to buy, windscreen & frame.
Re: newbee from Grantham/Peterborough - speedster clinic 356
Hi, you are welcome to come over to have a good look round mine I'm only in Nottingham if you fancy a drive over??
Ian
356 Replica with 911sc
Rita the Queen of Speed!
356 Replica with 911sc
Rita the Queen of Speed!
-
- DDK Seasoned Poster
- Posts: 38
- Joined: Mon Aug 27, 2012 10:57 am
- Location: Near Peterborough
Re: newbee from Grantham/Peterborough - speedster clinic 356
received my gauges today and senders from vintagespeedsters. Before I get too far into this, anyone have any simple diagrams for the wiring for the reverse of the rev counter & temp/fuel gauge (sorry about the big pics). Not too bad at electrics, but thought I would ask before I get stuck in. Any pics/diagrams to presland_presland@hotmail.com.
Temp/Fuel
Rev Counter
One issue though, the VDO temp sender they have sent is marked as a VW rabbit (which I think is a golf) not the Type 1 beetle engine one I asked for! Wil contact vintage speedsters about this, but is it just the VDO sump sender (or dip stick sender) unit that is used for the replica porsche gauges as I have one kicking around in the garage.
Ian, sent a PM about a visit
Thanks
David
Temp/Fuel
Rev Counter
One issue though, the VDO temp sender they have sent is marked as a VW rabbit (which I think is a golf) not the Type 1 beetle engine one I asked for! Wil contact vintage speedsters about this, but is it just the VDO sump sender (or dip stick sender) unit that is used for the replica porsche gauges as I have one kicking around in the garage.
Ian, sent a PM about a visit
Thanks
David
-
- DDK Seasoned Poster
- Posts: 38
- Joined: Mon Aug 27, 2012 10:57 am
- Location: Near Peterborough
Re: newbee from Grantham/Peterborough - speedster clinic 356
cheers Oliver, spent over an hour trawling the net before posting. Obviously was looking in the wrong places! Owe you a beer if we ever meet.
-
- DDK Seasoned Poster
- Posts: 38
- Joined: Mon Aug 27, 2012 10:57 am
- Location: Near Peterborough
-
- DDK above all
- Posts: 159
- Joined: Fri Aug 22, 2008 5:32 pm
Re: newbee from Grantham/Peterborough - speedster clinic 356
could not be bothered to read through the full link, was the conclusion type one sender is m10x1mm thread, which it is
http://www.mattgillrestoration.co.uk
1969 911t
1969 911t
Re: newbee from Grantham/Peterborough - speedster clinic 356
heres a tip....put a fuse or resistor in the circuit for the rev counter and a large fuse on the battery. My regulator failed, cooked the battery and took out my vintage speedster rev counter which took 3 months to get the relevant spares from china to fix...although I bet much of that delay was down to speedycables incompetance.
I have lots of wiring diagrams just shout if you want anything. Gary helped me no end and the end result is darn good.
I have lots of wiring diagrams just shout if you want anything. Gary helped me no end and the end result is darn good.
Built a Pilgrim Speedster...only down one kidney
My build: https://sites.google.com/site/bonerp356/home
http://www.Speedsterclinic.co.uk
Now for sale! Next project looms...
My build: https://sites.google.com/site/bonerp356/home
http://www.Speedsterclinic.co.uk
Now for sale! Next project looms...
Re: newbee from Grantham/Peterborough - speedster clinic 356
Quite agree - and a fuse on the alternator to battery wire in case it gets ripped off or an otherwise innocent fire damages the insulation.....bonerp wrote:heres a tip....put a fuse or resistor in the circuit for the rev counter and a large fuse on the battery. My regulator failed, cooked the battery and took out my vintage speedster rev counter which took 3 months to get the relevant spares from china to fix...although I bet much of that delay was down to speedycables incompetance.
I have lots of wiring diagrams just shout if you want anything. Gary helped me no end and the end result is darn good.
-
- DDK Seasoned Poster
- Posts: 38
- Joined: Mon Aug 27, 2012 10:57 am
- Location: Near Peterborough
Re: newbee from Grantham/Peterborough - speedster clinic 356
Cheers everyone.
Plans may be changing, my splitty isnt really suited to being out on the drive in this weather and works crazy at the moment so may have to pass this on to someone to finish. Gutted if I have to, with have to give it some serious thought.
Sad days
Plans may be changing, my splitty isnt really suited to being out on the drive in this weather and works crazy at the moment so may have to pass this on to someone to finish. Gutted if I have to, with have to give it some serious thought.
Sad days