Progress???
Moderator: Bootsy
Progress???
Hi Folks,
Glacial progress continues..After being let down several times by the lad who was gonna lay down the paint, I decided to have a go myself.
Although I have the required air fed mask, I decided against 2k and went with good old school cellulose, ( I did my last resto, a fiat 500 with 2k, found it an immense pain working in my tiny garage with an air fed and also found the paint to be very brittle after a year or so)
So here is my first trial panel !!
Uploaded with ImageShack.us
Nice and shiny straight off of the gun (fluke), but a tiny bit dry in a couple of places......Will leave for a few days and color sand to see if the finish is acceptable, but so far I like it .....
Gerry
Glacial progress continues..After being let down several times by the lad who was gonna lay down the paint, I decided to have a go myself.
Although I have the required air fed mask, I decided against 2k and went with good old school cellulose, ( I did my last resto, a fiat 500 with 2k, found it an immense pain working in my tiny garage with an air fed and also found the paint to be very brittle after a year or so)
So here is my first trial panel !!
Uploaded with ImageShack.us
Nice and shiny straight off of the gun (fluke), but a tiny bit dry in a couple of places......Will leave for a few days and color sand to see if the finish is acceptable, but so far I like it .....
Gerry
Re: Progress???
Nice one Gerry.
Not sure cos of monitor settings etc... what colour is that? (looks orangey red)
Not sure cos of monitor settings etc... what colour is that? (looks orangey red)
Re: Progress???
RAL 3001
Kinda, "in yr face", signal red
Just like this wee model that's been sat on my desk for 3 yrs, (storing my hood badge).....!
Uploaded with ImageShack.us
Kinda, "in yr face", signal red
Just like this wee model that's been sat on my desk for 3 yrs, (storing my hood badge).....!
Uploaded with ImageShack.us
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: Progress???
Good for you having a go your-self. If you make a good if, l will send mine up when ready
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
Re: Progress???
Some interior paint....Came out not too bad
I've only done this once before...My method goes something like this:
After months of prep.....
1 Rub down with 400 grit on soft block, blow off dust, panel wipe, tack rag
2 Shoot primer, wait 24hrs
3 Rub down with 400 grit, blow off dust, panel wipe, tack rag
4 Shoot topcoat, wait 24hrs
5 Rub down with 600 grit, blow off dust, panel wipe, tack rag
still to come (if needed )
rub down with 2000 grit, buff, stand back and smile, (Hopefully......)
Fingers crossed that the paint does not fall off on the first corner !!! Its all a bit trial and error
Cost is around 250 quid at the mo, so if it all goes horribly wrong/looks shite at least I will have had some education for my money....
Funny thing about red paint though.....with all of the cleanup rags/wipes etc in the bin...looks like a mass murderer has been on the loose !
Shot at 2012-06-25
Shot at 2012-06-25
Shot at 2012-06-25
This week I'll reverse the masking and do the outside....scary stuff !
I've only done this once before...My method goes something like this:
After months of prep.....
1 Rub down with 400 grit on soft block, blow off dust, panel wipe, tack rag
2 Shoot primer, wait 24hrs
3 Rub down with 400 grit, blow off dust, panel wipe, tack rag
4 Shoot topcoat, wait 24hrs
5 Rub down with 600 grit, blow off dust, panel wipe, tack rag
still to come (if needed )
rub down with 2000 grit, buff, stand back and smile, (Hopefully......)
Fingers crossed that the paint does not fall off on the first corner !!! Its all a bit trial and error
Cost is around 250 quid at the mo, so if it all goes horribly wrong/looks shite at least I will have had some education for my money....
Funny thing about red paint though.....with all of the cleanup rags/wipes etc in the bin...looks like a mass murderer has been on the loose !
Shot at 2012-06-25
Shot at 2012-06-25
Shot at 2012-06-25
This week I'll reverse the masking and do the outside....scary stuff !
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: Progress???
Looks good Ger, just the bumpers left to do then, did you spray it in your workshop?? How many coats did you apply??
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
Re: Progress???
This is taking forever......
Yep, all done in my cramped and dusty garage...
Hopefully I have completed the final coat on Saturday.....After several coats of filler primer and lots of sanding, I put on a few topcoats. It looked fantastic....from about 10 feet....! Close up it was full of scratches showing thro the topcoat Soooo, more sanding, more filler/primer, more sanding and finally more topcoat.
No wonder professional paint is expensive....
Yesterday I sanded it all again with 2000 grit, and evened out a few dry spots and nibs. Plan is now to buff with G10, G3 and hope that it comes up shiney Some trial buffing thro the week looked great..
Be next weekend before I get round to that, then get ready for a new MOT, (jings is really a year since I got this on the road....), how time flys
Yep, all done in my cramped and dusty garage...
Hopefully I have completed the final coat on Saturday.....After several coats of filler primer and lots of sanding, I put on a few topcoats. It looked fantastic....from about 10 feet....! Close up it was full of scratches showing thro the topcoat Soooo, more sanding, more filler/primer, more sanding and finally more topcoat.
No wonder professional paint is expensive....
Yesterday I sanded it all again with 2000 grit, and evened out a few dry spots and nibs. Plan is now to buff with G10, G3 and hope that it comes up shiney Some trial buffing thro the week looked great..
Be next weekend before I get round to that, then get ready for a new MOT, (jings is really a year since I got this on the road....), how time flys
-
- DDK slapper chatter
- Posts: 329
- Joined: Thu May 24, 2007 11:06 pm
- Location: east-kilbride
- Contact:
Re: Progress???
I,ll wait till the dust settles before i come over and see the finished article,now i know why there is red glow over Coatbridge
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: Progress???
Looking good Gerry. Those gaps are nice and tight on the petrol cap and bonnet, can't see the doors. Did the Cmc come with tight gaps or did you do a lot of work to get it right?? What colour interia did you go for??
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
Re: Progress???
Cheers Rich!
I cut filler flap with a fine jigsaw then hinged the cutout....Door gaps are not too bad at all, in fact I had to do some filing back to make some clearance. Bonnet fits well but has a slight warp across width. I've had it latched down with different thickness seals and it comes back level and will hopefully settle down after a while.
Still fighting the paint, and still have a few scratches, but they are responding to 3000 grit and lots of compounding.......
Working away this week so no more progress till weekend...
I cut filler flap with a fine jigsaw then hinged the cutout....Door gaps are not too bad at all, in fact I had to do some filing back to make some clearance. Bonnet fits well but has a slight warp across width. I've had it latched down with different thickness seals and it comes back level and will hopefully settle down after a while.
Still fighting the paint, and still have a few scratches, but they are responding to 3000 grit and lots of compounding.......
Working away this week so no more progress till weekend...
Re: Progress???
and the interior......Black with red stitching..
Sitting behind me here under my new hood in my untidy home office and not easy to photograph but here's a wee taster....
Uploaded with ImageShack.us
Sitting behind me here under my new hood in my untidy home office and not easy to photograph but here's a wee taster....
Uploaded with ImageShack.us
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: Progress???
Your such a tart and a tease...
Looks rather nice if l do say so myself
Looks rather nice if l do say so myself
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build