RSR (now '65 2.0l) Race Car Project
Moderator: Bootsy
-
- Me and DDK sitting in a tree! KISSING
- Posts: 2568
- Joined: Tue Oct 19, 2004 8:46 pm
- Location: Dorchester
Re: RSR (now '65 2.0l) Race Car Project
Just remembered to pass this on, those blowers from DT are actually made by Rule and freely available at good prices from marine chandlerys as engine space blowers.
TTFN
TTFN
ddk member# 1527
Austin Healey 100/6, 1957 Fast Road ( now sold)
75 2.7 S backdated to "r" and very light (now sold).
Adria Camper
Buddy McCrae kneeboard.
Friar Tuck kneeboard.
Lots of Bicycles.
Austin Healey 100/6, 1957 Fast Road ( now sold)
75 2.7 S backdated to "r" and very light (now sold).
Adria Camper
Buddy McCrae kneeboard.
Friar Tuck kneeboard.
Lots of Bicycles.
-
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Re: RSR (now '65 2.0l) Race Car Project
Thx for that advice - i might seal up the inside of the smuggler's box so that no fuel can get from there in to cabin. I've used bulkhead fitting for all fuel and oil lines that pass into the cabin and i appreciate your input in continuing yo keep it safe. I think it's more inportant to make the car as safe as possible rather than just to please the scruitneers, i think this way and by using common sense they'll be happy as well.911hillclimber wrote:I hillclimb a LHD 911T 1973 for years now and have had occasionally grief from the scrutineers about the hatch to the smuggler's box. You have those two big fuel pumps right next to the lid which I presume is not sealed off, thus there is a direct route for a big fuel spill into the cabin.
Not sure how you rally people deal with this problem, but are you ok leaving it openable??
65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
-
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Re: RSR (now '65 2.0l) Race Car Project
redrobin911 wrote:Thx for that advice - i might seal up the inside of the smuggler's box so that no fuel can get from there in to cabin. I've used bulkhead fitting for all fuel and oil lines that pass into the cabin and i appreciate your input in continuing yo keep it safe. I think it's more inportant to make the car as safe as possible rather than just to please the scruitneers, i think this way and by using common sense they'll be happy as well.911hillclimber wrote:I hillclimb a LHD 911T 1973 for years now and have had occasionally grief from the scrutineers about the hatch to the smuggler's box. You have those two big fuel pumps right next to the lid which I presume is not sealed off, thus there is a direct route for a big fuel spill into the cabin.
Not sure how you rally people deal with this problem, but are you ok leaving it openable??
Anyone any ideas of what to use to fill the hole and along the seam to keep the integrity of the firewall?
65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
-
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Re: RSR (now '65 2.0l) Race Car Project
I also recovered the dashboard after trimming the size to fit - the job wasn't made easy by the rollcage being in place.
65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
-
- Nurse, I think I need some assistance
- Posts: 18939
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: RSR (now '65 2.0l) Race Car Project
Simply use clear silicone sealer.
I converted my 911 from LHD to RHD and to do this you remove the smugglers box as the factory did for RHD. This opens the whole cabin to the front boot/tank etc and a scrutineer came down heavy on me. It was as much because the lid can open if left with just the simple tab that compresses the seal in place.
With a good seal and a screw to kepp it closed he was happy and I've had no probs for 18 years since!
I think silicone to plug that drain hole/gap and a visible screw to keep the clasp in the closed position will satisfy the Scrutes.
Exactly as you say, common sense and a practical solution is all they are after (and compliance to the Blue Book). In fact, I think there is a section on bulkheads in the safety section of the B book.
The scrutes do a great job for us all.
I converted my 911 from LHD to RHD and to do this you remove the smugglers box as the factory did for RHD. This opens the whole cabin to the front boot/tank etc and a scrutineer came down heavy on me. It was as much because the lid can open if left with just the simple tab that compresses the seal in place.
With a good seal and a screw to kepp it closed he was happy and I've had no probs for 18 years since!
I think silicone to plug that drain hole/gap and a visible screw to keep the clasp in the closed position will satisfy the Scrutes.
Exactly as you say, common sense and a practical solution is all they are after (and compliance to the Blue Book). In fact, I think there is a section on bulkheads in the safety section of the B book.
The scrutes do a great job for us all.
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Re: RSR (now '65 2.0l) Race Car Project
OK so a good bit of the work done and engine and transmission rebuilding at Meryvn Johnstons as we speak, so time to finish of the body work. Mate Ali been back to help tonight and we got both doors on and one front wing. Hope to get the other wing, front bumper and bonnet fitted tomorrow night. If we're happy with that i'll keep the bonnet off until i've finished completely in the luggage compartment. Over the next week i want all body work finished inc all glass etc. I've been spending many hours preparing door frames with new seals refurbishing front and rear indicator clusters etc. All ready to pop in. Car should "look" much better over the coming week.
Wiring next to be considered along with fuel lines - coming together nicely!
Wiring next to be considered along with fuel lines - coming together nicely!
65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: RSR (now '65 2.0l) Race Car Project
Looking good Robin, is it my eyes or have you change the lighting?? Looked White in previous pictures, now it looks simlar to an old English White. Still looks swell either colour.
Keep the pics coming
Keep the pics coming
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
Re: RSR (now '65 2.0l) Race Car Project
What's that hiding in the background? (Martini striped).
I love the smell of burnt rubber and hydrocarbons in the morning, it smells of......victory.
-
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Re: RSR (now '65 2.0l) Race Car Project
That'll be a 3.0sc that had a bit of widening - full RSR bodywork. Car has has a full restoration and needs the interior doing to make it perfect and peachy. It will be for sale at some stage soon. It's an impact bumper car but stunning nonetheless.JB-L wrote:What's that hiding in the background? (Martini striped).
Another pic below.
65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
-
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Re: RSR (now '65 2.0l) Race Car Project
Front and rear windscreens in - rear was a nightmare - took 4 hours to get right. Fitting the glass makes such a big difference to the car, i suppose this car hasn't had any glass for years.
Rear bumpers and gaskets fitted and front bumper offered up - looks like it will fit well. Window frames are next on the list. I'd really like all the glass fitted for the end of next week. I've still lots of other jobs to do - FIA rain light, brake lines, wiring - long list really.
Rear bumpers and gaskets fitted and front bumper offered up - looks like it will fit well. Window frames are next on the list. I'd really like all the glass fitted for the end of next week. I've still lots of other jobs to do - FIA rain light, brake lines, wiring - long list really.
65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
Re: RSR (now '65 2.0l) Race Car Project
Any update on this project Robin ?
Dave
Dave
1972 2.4S, since 1988
993 RSR Cup
73 RS Rep Race
2018 GT3RS Lizard
993 RSR Cup
73 RS Rep Race
2018 GT3RS Lizard
-
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Re: RSR (now '65 2.0l) Race Car Project
Funny you should say that we're in the last push to get the car finished. I've been very busy with work and have an ex Kremer Bros fabricator/mechanic working on it as we speak - a local guy here in NI - what's the chances of that??. Diff will be here early next week so can put engine and tranny in, then its finish of the wiring and plumbing and that should be that. Hope to have most done before the Christmas break then car driving in Jan. Will post some update pics next week.majordad wrote:Any update on this project Robin ?
Dave
65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
-
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Re: RSR (now '65 2.0l) Race Car Project
Following on from the last post the push is on to get the car finished so I can go racing next year. Engine being prepared ready to fit - don't the Solex's look lovely!! Engine shroud is glass fibre and a rather colourful set of Magnecor HT leads.
65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
-
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Re: RSR (now '65 2.0l) Race Car Project
At last we've got the rebuilt transmission back and now with the engine in the car.
Still lot to do plumbing up the fuel and oil lines not to mention finishing the wiring but getting this far makes a big difference - feels like a 911 again!
Needless to say we're working flat out to get the car ready to go racing this year. More updates as the week progresses.
Still lot to do plumbing up the fuel and oil lines not to mention finishing the wiring but getting this far makes a big difference - feels like a 911 again!
Needless to say we're working flat out to get the car ready to go racing this year. More updates as the week progresses.
65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
-
- Put a fork in me, I'm done!
- Posts: 1594
- Joined: Tue Aug 24, 2010 11:56 pm
- Location: Northern Ireland
Re: RSR (now '65 2.0l) Race Car Project
Many moons ago I fitted the oil cooler and lines to the front of the car but now needed to fit the lines to the engine and oil tank to finish the job. We changed/modified some existing Porsche with some weld on AN12 fittings to allow for a tidier job and connected everything up including to the thermostat and beyond. So now we're just finishing welding mods to a "off the shelf" oil catch tank and will fit it over the weekend - oil lines will then be finished.
Parts arrived today to work on the fuel supply but were wrong so have to return them and wait for new ones - means we won't be waking this girl up from her long sleep for another week. So will look at doing some other work over the weekend.
Parts arrived today to work on the fuel supply but were wrong so have to return them and wait for new ones - means we won't be waking this girl up from her long sleep for another week. So will look at doing some other work over the weekend.
65 911 FIA race car
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD
66 911 RHD restoration
67 911S LHD
74 911 Carrera 2.7 US Spec
79 Aistream Excella 28 MH
97 Bimota Vdue
14 KTM 690R Duke
83 RD350 YPVS
08 Ducati M900
00 Ducati 996SPS
944 T, 3.2 RSR, GT3 - SOLD