Pre A SOS

johnM · Post by **johnM** » Mon Mar 09, 2015 8:00 pm

Hi Phil

The casings look great but I would be very careful about vapour blasting anything that sees oil. It's very difficult to clean all the media as it gets impregnated into the metal then can come out as it gets washed with hot oil.

Kind regards

Phil Parry · Post by **Phil Parry** » Thu Mar 12, 2015 10:35 pm

Thanks John. Noted!

James, I'll be in Connecticut 22nd to 26th or 27th ...in Stamford. I think you're in CT too? Far? Fancy meeting up? I'll be at a shipping conference Monday to Wednesday. I'll check and reply again on all your comments. Most interesting. The trans is numbered 5776H5.

We've been experimenting with some cold black oxide chemicals today. Superb results. More to follow.

Phil Parry · Post by **Phil Parry** » Fri Mar 13, 2015 6:35 am

Fanfare!

Phil Parry · Post by **Phil Parry** » Fri Mar 13, 2015 6:49 am

Thoroughly enjoyed uncovering the car's years of disguises....

johnM · Post by **johnM** » Fri Mar 13, 2015 8:54 am

Great stuff Phil.

I found that uncovering all this stuff really changed the way I felt about my car. Imagine what its seen over the years.

Kind Regards

Phil Parry · Post by **Phil Parry** » Sat Jun 20, 2015 11:17 am

Progress has been steady over the last few months. A huge number of parts have been carefully disassembled, cleaned, primed and painted ...using only the best quality German paint of course. We now have shelves full of beautiful new-looking pre-A parts. Nice! Welding the body only just about to start sadly - just too many similarly unwell folk in the queue.

The gearbox is now back together and looking great. Check on vlog8 on youtube channel PorscheSOS. https://www.youtube.com/watch?v=ep9ovMXS2Ic

Phil Parry · Post by **Phil Parry** » Sat Jun 20, 2015 11:19 am

We've also tested the ColdOx black oxide kit from Caswell Europe and found it excellent. If you've been wondering how to recreate black oxide (e.g. throttle bodies on Zenith carbs) rather than painting things that weren't originally painted, I'd recommend it. http://www.caswelleurope.co.uk/

oldtimer · Post by **oldtimer** » Sat Jun 20, 2015 12:40 pm

Hi Phil , good work ! The gearbox looks great , out of interest what was replaced in it ?

Phil Parry · Post by **Phil Parry** » Sat Jun 20, 2015 1:18 pm

Here's the full list. Surprisingly little of significance though.

Rear Mount 2 req'd VW transaxle Mounts
Rubber Gasket
519 Transmission Repair Set Gaskets
519 Transmission Repair Set Hardware
Differential Housing Bearing for 519
Starter bushing
Axle Boots 2 reqd
Main Shaft Seal
Ground Strap 177mm
Transaxle Mount Locking Plate
Cross Shaft Return Spring for 519
Castellated Nut 2 req'd
Washers for castellated nuts (PRS make these)
Rear Seal kit x2
Rear Wheel Bearing x2
Bushing in Shifter Link x2
Shift Boot

Phil Parry · Post by **Phil Parry** » Thu Jan 07, 2016 10:43 pm

One very excited bunny. Bodywork on the Pre A very nearly finished. A couple more days and we're on to trial fitting!!

https://youtu.be/2_rS8KB-bDQ

sladey · Post by **sladey** » Thu Jan 07, 2016 10:48 pm

Car's looking great. Not sure about the choice of music though - wasn't it used in 'platoon'?

Phil Parry · Post by **Phil Parry** » Thu Mar 17, 2016 11:56 am

Finally, having given up on Photobucket, I've loaded some images of the Pre A build on Flickr.

It's been almost a full-time job shopping and trawling for original parts this last several months. Everything original so far except a repro starter button and an A ignition. Both hard to find and both very expensive when you do. Still hoping for an original gear knob.

Very pleased with the parts restoration, especially the various cables such as the throttle cable. They were all vandalised / cut by some toe rag who tried to steal the lot before the car left the States.

After 1057 hours in Lionel's bodyshop, we trial fitted many of the parts and then sent the car to the paintshop.

Carbs are on their way back from Carburetor Rescue and I'm off to New York and Connecticut this week where they're being delivered to my hotel for cuddling on the way home. I'll be meeting James Davies for the second time. James has become something of an originality guru (and is a lovely bloke). Tacho is on its way back from Palo Alto Speedometer (although I still can't believe that we don't have a good restorer here in the UK - I have a friend doing some trial runs on some gauges to try him out for quality) and I'm anticipating a delivery any day of rockers / rocker bolts, a couple of tappets with adaptors, various fuel lines, camshaft and oil filler from Stepan Gencev in the Czeck Republic. He advertises on the Samba and has been good to deal with. I'll report back on the quality of parts when they're here.

Here are some piccies:

IMG_2861 by Phil Parry, on Flickr

IMG_2878 by Phil Parry, on Flickr

IMG_2872 by Phil Parry, on Flickr

2015-10-10 09.56.49 by Phil Parry, on Flickr

2016-01-08 20.25.29 by Phil Parry, on Flickr

FullSizeRender by Phil Parry, on Flickr

IMG_2441 by Phil Parry, on Flickr

IMG_2491 by Phil Parry, on Flickr

IMG_2537 by Phil Parry, on Flickr

IMG_2516 by Phil Parry, on Flickr

Looking for these knobs. Apparently, barndoors used them too. Anyone know anyone with some?

2016-02-27 13.11.45 by Phil Parry, on Flickr

2016-03-11 07.42.26 by Phil Parry, on Flickr

roy mawbey · Post by **roy mawbey** » Thu Mar 17, 2016 12:32 pm

Nice progress Phil, its going to look great!!

Roy

neilbardsley · Post by **neilbardsley** » Thu Mar 17, 2016 3:03 pm

1057 hours : Ouch!

Hendrik Moulds · Post by **Hendrik Moulds** » Fri Mar 18, 2016 8:55 am

neilbardsley wrote:1057 hours : Ouch!

That's no surprise at all with these cars, over 2500 hours on my notchback so far!

Looking great Phil, keep up the good work.

DDK - Die Deutschen Klassiker

Pre A SOS

Re: My 54 Pre A

Re: My 54 Pre A

Re: My 54 Pre A

Re: My 54 Pre A

Re: My 54 Pre A

Re: My 54 Pre A

Re: My 54 Pre A

Re: My 54 Pre A

Re: My 54 Pre A

Re: Pre A SOS

Re: Pre A SOS

Re: Pre A SOS

Re: Pre A SOS

Re: Pre A SOS

Re: Pre A SOS