Told you sohot66 wrote: ....a big hammer....
rear wheel bearings - removing the hub ?
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
- I need to get out more!
- Posts: 3277
- Joined: Mon Apr 26, 2004 7:51 am
- Location: Selby
-
- Nurse, I think I need some assistance
- Posts: 4206
- Joined: Fri Nov 14, 2003 3:10 pm
- Location: Bournemouth
- Contact:
Thats great.
As this job is being done in situ do you have the tools to pull the new bearing and then the hub back in? I made mine and if needed you are welcome to use them.
HTH
Alan
As this job is being done in situ do you have the tools to pull the new bearing and then the hub back in? I made mine and if needed you are welcome to use them.
HTH
Alan
http://www.canfordclassics.co.uk
Porsche Restoration & Sales
Porsche Restoration & Sales
.... well once I got the hub out it all went well Mike's home brewed bearing tool worked fantastically , as did his home brewed tool for reinstalling the hub back into the bearing The offside bearing ended up taking quite a while to do due to the problem extracting the hub ..... the nearside I have just completely done in under 3 lazy hours The hub popped out pretty quickly
James
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1973 MGB Roadster
Its not how fast you go, but how you go fast
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1973 MGB Roadster
Its not how fast you go, but how you go fast
-
- I luv DDK!
- Posts: 779
- Joined: Fri Mar 31, 2006 10:54 am
- Location: Kendal CUMBRIA
- Contact: