After reading the other thread I thought it would be a good idea to upgrade the rear brakes lights on the 993 to LED’s. Failed
When you put one in with the old bulb in the other with the lights on, works fine. When you put both LED’s in with the lights on, nothing. Spoke to the lad at ClassicLED and he says because they use such low current they take the easiest path of resistance. He said check the terminals and test with a multimeter. It was at this point I realised I ain’t got a clue what you are saying.
Cleaned the terminals but still no success.
Anybody got a ABC guide of what to do
Rear LED light upgrade fail (993)
Moderators: hot66, impmad2000, Nige
Rear LED light upgrade fail (993)
72 2.4s
96 993 RS
Series 1 DDK membership card
96 993 RS
Series 1 DDK membership card
-
- I need to get out more!
- Posts: 3100
- Joined: Tue Apr 21, 2009 4:12 pm
- Location: Killaloe, Ireland
- Contact:
Re: Rear LED light upgrade fail (993)
Does the car have cruise control?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- I need to get out more!
- Posts: 3100
- Joined: Tue Apr 21, 2009 4:12 pm
- Location: Killaloe, Ireland
- Contact:
Re: Rear LED light upgrade fail (993)
Ok, I had the same problem on a car with cruise control. Have a look on Tore Bergville’s website, lots of info there.
https://www.bergvillfx.com/
Sent from my iPhone using Tapatalk
https://www.bergvillfx.com/
Sent from my iPhone using Tapatalk