O/T - Der uber-shed
Moderators: hot66, Miggs, 58A - 71E, impmad2000, drummerboytom, Barry, Helen, Viv_Surby, Derek, KS, abm914, Mike Usiskin
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2238
- Joined: Mon May 24, 2004 10:54 pm
- Location: london/surrey
Re: O/T - Der uber-shed
Looking proper posh there Mark…good effort …
1974 2.7 Carrera
(full restoration. now as an RS Touring)
1963 3.8 E Type
( 11 years in the making…………………….)
1952. XK120…the next one ……….……..)
(full restoration. now as an RS Touring)
1963 3.8 E Type
( 11 years in the making…………………….)
1952. XK120…the next one ……….……..)
-
- Nurse, I think I need some assistance
- Posts: 8774
- Joined: Sat Apr 23, 2005 9:08 pm
- Location: Nottingham, UK
O/T - Der uber-shed
Slight update - nothing major
Tidied the front of those shelves/drawers - cut some thin strips of oak and glued them on and then oiled them
And then chucked a bit of ambiance at the walls
Tidied the front of those shelves/drawers - cut some thin strips of oak and glued them on and then oiled them
And then chucked a bit of ambiance at the walls
Last edited by sladey on Wed Dec 21, 2022 1:27 pm, edited 1 time in total.
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
I look pretty young but I'm just backdated yeah
-
- Nurse, I think I need some assistance
- Posts: 8774
- Joined: Sat Apr 23, 2005 9:08 pm
- Location: Nottingham, UK
O/T - Der uber-shed
Ok now Tapatalk won’t let me upload images
Trust me, it’s gorra lorra ambiance
Ah it worked finally!!
I should add - the new speaker on the wall - the power cable isn't like that any more - I've run some fresh 25mm conduit up the wall to a new socket just next to the speaker
Trust me, it’s gorra lorra ambiance
Ah it worked finally!!
I should add - the new speaker on the wall - the power cable isn't like that any more - I've run some fresh 25mm conduit up the wall to a new socket just next to the speaker
Last edited by sladey on Wed Dec 21, 2022 4:56 pm, edited 1 time in total.
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
I look pretty young but I'm just backdated yeah
-
- Nurse, I think I need some assistance
- Posts: 8774
- Joined: Sat Apr 23, 2005 9:08 pm
- Location: Nottingham, UK
O/T - Der uber-shed
Now starting on the corner unit - I wanted a carousel for that.
So I picked up a cheap Chinese bender (DDK QOTY contender?)
Turns out it is *really* hard to control the amount of bend.
I ended up with something close though.
After a lot of messing about on Sunday I ended up with these (Tapatalk is dicking me about again)
Basically I need something that can act as a carousel but which can be unbolted and dismantled if I need to
So I picked up a cheap Chinese bender (DDK QOTY contender?)
Turns out it is *really* hard to control the amount of bend.
I ended up with something close though.
After a lot of messing about on Sunday I ended up with these (Tapatalk is dicking me about again)
Basically I need something that can act as a carousel but which can be unbolted and dismantled if I need to
Last edited by sladey on Wed Dec 21, 2022 4:53 pm, edited 1 time in total.
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
I look pretty young but I'm just backdated yeah
-
- Nurse, I think I need some assistance
- Posts: 8774
- Joined: Sat Apr 23, 2005 9:08 pm
- Location: Nottingham, UK
O/T - Der uber-shed
Let’s try again
Weirdly it worked
So the middle ‘half-shafts’ bolt onto the central column (that rotates on a bush)
After doing all this and putting it together the front edges didn’t line up with the unit so a bit of extra cutting and shutting was required.
Currently it sits in there nicely and spins easily. Now need to add second shelf above it, then add doors onto the front and finally plywood shelves to sit into the frame. This part has been a bit of a ball-arch TBH but the end is in sight
Weirdly it worked
So the middle ‘half-shafts’ bolt onto the central column (that rotates on a bush)
After doing all this and putting it together the front edges didn’t line up with the unit so a bit of extra cutting and shutting was required.
Currently it sits in there nicely and spins easily. Now need to add second shelf above it, then add doors onto the front and finally plywood shelves to sit into the frame. This part has been a bit of a ball-arch TBH but the end is in sight
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
I look pretty young but I'm just backdated yeah
- Nige
- Nurse, I think I need some assistance
- Posts: 6601
- Joined: Wed Nov 26, 2003 9:11 pm
- Location: Denby, Derbyshire
Re: O/T - Der uber-shed
How many staff are you planning to employ once this workshop is up and running?
The work environment looks favourable.
The work environment looks favourable.
-
- Nurse, I think I need some assistance
- Posts: 8774
- Joined: Sat Apr 23, 2005 9:08 pm
- Location: Nottingham, UK
Re: O/T - Der uber-shed
I'm going to try and keep the employees below 20 - summat manageable
My Shadow foam has arrived but can't seem to upload a pic through tapatalk. The shadowfoam will be my treat over Christmas - starting to put all my tools into the drawers - all in shadowfoam.
My Shadow foam has arrived but can't seem to upload a pic through tapatalk. The shadowfoam will be my treat over Christmas - starting to put all my tools into the drawers - all in shadowfoam.
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
I look pretty young but I'm just backdated yeah
-
- Nurse, I think I need some assistance
- Posts: 8774
- Joined: Sat Apr 23, 2005 9:08 pm
- Location: Nottingham, UK
Re: O/T - Der uber-shed
Some progress over the break
Finally moved forward with the ball-ache carousel
Got 2 more shelves to cut and fit in, slap some oil on the door and it will be done
Finally moved forward with the ball-ache carousel
Got 2 more shelves to cut and fit in, slap some oil on the door and it will be done
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
I look pretty young but I'm just backdated yeah
-
- Nurse, I think I need some assistance
- Posts: 8774
- Joined: Sat Apr 23, 2005 9:08 pm
- Location: Nottingham, UK
Re: O/T - Der uber-shed
Also got started on the shadow foam.
Eldest daughter enjoyed helping (I say helping, she did that first drawer on her own - did a cracking job)
Then did a couple more drawers. Looking good so far
Only 22 more drawers to go!
I don’t have that many tools (I think) but I’m going to put the shadow foam in all of them and then when I’m ready I can cut more tools in
Eldest daughter enjoyed helping (I say helping, she did that first drawer on her own - did a cracking job)
Then did a couple more drawers. Looking good so far
Only 22 more drawers to go!
I don’t have that many tools (I think) but I’m going to put the shadow foam in all of them and then when I’m ready I can cut more tools in
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
I look pretty young but I'm just backdated yeah
Re: O/T - Der uber-shed
Proper insta ready
You need a lot of drawer space to spread out tools with shadow foam but to be that organised must be great.
Well done getting your daughter involved. Mine is in the moody teen phase with plenty of rolling eyes, so isn’t much help currently .
You need a lot of drawer space to spread out tools with shadow foam but to be that organised must be great.
Well done getting your daughter involved. Mine is in the moody teen phase with plenty of rolling eyes, so isn’t much help currently .
-
- Nurse, I think I need some assistance
- Posts: 8774
- Joined: Sat Apr 23, 2005 9:08 pm
- Location: Nottingham, UK
Re: O/T - Der uber-shed
Thanks Bruce. I did 'cull' a lot of tools before deciding which ones made it to the drawer and to be honest the ones I've left behind are knackered and never getting used anyway. I'm aiming to do hammers, screwdrivers, and measuring drawers. Dunno after that
The Moody teen phase wears off after a decade or two
The Moody teen phase wears off after a decade or two
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
I look pretty young but I'm just backdated yeah
-
- I need to get out more!
- Posts: 3418
- Joined: Mon Apr 16, 2007 9:06 pm
- Location: Portland, Oregon, USA
Re: O/T - Der uber-shed
Just gone back over the thread, bloody love it Mark !! I need to find myself a barn and some more power outlets
Hope all is well mate
Hope all is well mate
# 465
1967 912 Polo Red
1968 912/11 RAL 7001 ' MOD ROD '
1990 964 C2 Velvet Red
1991 VW Vanagon GL (SOLD - Vanagone)
2017 Coleman CT200U
“It’s not where you’re from, it's where you’re at”
1967 912 Polo Red
1968 912/11 RAL 7001 ' MOD ROD '
1990 964 C2 Velvet Red
1991 VW Vanagon GL (SOLD - Vanagone)
2017 Coleman CT200U
“It’s not where you’re from, it's where you’re at”
-
- Nurse, I think I need some assistance
- Posts: 8774
- Joined: Sat Apr 23, 2005 9:08 pm
- Location: Nottingham, UK
Re: O/T - Der uber-shed
Thanks Chris
The new space is great to work in but the lift is the biggest game changer - being able to move the car up and down at will so you can just get in the right position is fantastic.
Hoping it will let me do more on the car in the months and years to come
Oh and you can never have too many power sockets
The new space is great to work in but the lift is the biggest game changer - being able to move the car up and down at will so you can just get in the right position is fantastic.
Hoping it will let me do more on the car in the months and years to come
Oh and you can never have too many power sockets
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
I look pretty young but I'm just backdated yeah
-
- Nurse, I think I need some assistance
- Posts: 8774
- Joined: Sat Apr 23, 2005 9:08 pm
- Location: Nottingham, UK
Re: O/T - Der uber-shed
Just a bit of an update
I’ve carried on gradually cutting out shadow-foam drawers throughout the year. It’s a bit of a ball-ache to do but feels great once you’ve done one.
Predominantly this year I’ve been actually using the shed/barn for its intended purpose, which has been nice - I’ve recently posted about my handbrake refurbishment on my hot rod thread. The shed has been a great place to work in.
In late October we had some bad rain round our way. We’ve got flood gates at the front of our house but our neighbors don’t - so they had a river running through their land which then came onto ours
This is the outside of the big barn and tannery(workshop)
Inside the tannery/workshop it wasn’t looking good
I had two things to be majorly grateful for
First it didn’t make it into the house at all
And secondly it didn’t make it into the Uber-shed - these are the steps leading up from the tannery to the shed
The only water that came into the shed was at the bottom of the pots for the scissor lift
To get the water out of the tannery I ordered a powerful pump but it took a few days to arrive and by the time it did the water had gone - leaving a 2-3 inch thick coating of mud throughout. Same for all the outbuildings.
Whilst it was great that it didn’t come into the house, I then had 10 days of solid work pressure washing every outbuildings and then having to scoop up the lake that was created and ladle it into bigger buckets. We also filled a massive skip.
Looking on the brightside it meant I got rid of loads of crap that had just been sitting around. But it was a shedload of work (see what I did there).
That’s all done now. We had a smaller flood a couple of weeks ago in the tannery but this time it came up through the floor - the water table is still unusually high so it didn’t take much. This time though the water was clean and drained away quickly leaving no mess.
Sent from my iPad using Tapatalk Pro
I’ve carried on gradually cutting out shadow-foam drawers throughout the year. It’s a bit of a ball-ache to do but feels great once you’ve done one.
Predominantly this year I’ve been actually using the shed/barn for its intended purpose, which has been nice - I’ve recently posted about my handbrake refurbishment on my hot rod thread. The shed has been a great place to work in.
In late October we had some bad rain round our way. We’ve got flood gates at the front of our house but our neighbors don’t - so they had a river running through their land which then came onto ours
This is the outside of the big barn and tannery(workshop)
Inside the tannery/workshop it wasn’t looking good
I had two things to be majorly grateful for
First it didn’t make it into the house at all
And secondly it didn’t make it into the Uber-shed - these are the steps leading up from the tannery to the shed
The only water that came into the shed was at the bottom of the pots for the scissor lift
To get the water out of the tannery I ordered a powerful pump but it took a few days to arrive and by the time it did the water had gone - leaving a 2-3 inch thick coating of mud throughout. Same for all the outbuildings.
Whilst it was great that it didn’t come into the house, I then had 10 days of solid work pressure washing every outbuildings and then having to scoop up the lake that was created and ladle it into bigger buckets. We also filled a massive skip.
Looking on the brightside it meant I got rid of loads of crap that had just been sitting around. But it was a shedload of work (see what I did there).
That’s all done now. We had a smaller flood a couple of weeks ago in the tannery but this time it came up through the floor - the water table is still unusually high so it didn’t take much. This time though the water was clean and drained away quickly leaving no mess.
Sent from my iPad using Tapatalk Pro
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
I look pretty young but I'm just backdated yeah
-
- Nurse, I think I need some assistance
- Posts: 8774
- Joined: Sat Apr 23, 2005 9:08 pm
- Location: Nottingham, UK
Re: O/T - Der uber-shed
A couple of months ago Jason put me onto a local garage that was selling up. I picked up a few bits and bobs including this little beauty
I’ve got this in a small ante-chamber between the Uber-shed and the tannery. The plan is to use it to serve air tools in the shed and also run a sandblaster in the tannery.
Most recently I started on the air tool part.
OK so after installing the lift controls in one panel I had this space next to it. As you can see I’d got the small compressor in there (that works with the scissor lift and disengages the safety blocks when you want to lower it.
I’d always thought the space left would be ideal for a spring-loaded air reel. I had one at my old house and it was great, but when I looked at it carefully I could see the rubber was perished, so I ordered a new one.
I wanted a panel to go over the hole and just have the hose coming out the a hole with rollers on it.
However I knew if it was a flat panel it would be too flexible, so I needed to build some bracing behind it
In the picture below you can see the chunky bracket I made for the reel itself, and the strengthening bars for the rollers
Sent from my iPad using Tapatalk Pro
I’ve got this in a small ante-chamber between the Uber-shed and the tannery. The plan is to use it to serve air tools in the shed and also run a sandblaster in the tannery.
Most recently I started on the air tool part.
OK so after installing the lift controls in one panel I had this space next to it. As you can see I’d got the small compressor in there (that works with the scissor lift and disengages the safety blocks when you want to lower it.
I’d always thought the space left would be ideal for a spring-loaded air reel. I had one at my old house and it was great, but when I looked at it carefully I could see the rubber was perished, so I ordered a new one.
I wanted a panel to go over the hole and just have the hose coming out the a hole with rollers on it.
However I knew if it was a flat panel it would be too flexible, so I needed to build some bracing behind it
In the picture below you can see the chunky bracket I made for the reel itself, and the strengthening bars for the rollers
Sent from my iPad using Tapatalk Pro
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
I look pretty young but I'm just backdated yeah