Cheers gents, it’s got something to do with that but it’s not the horn slip ring, that’s this one!
It’s from the other stalk. I’m sure if I could read the wiring diagram I could work it out
I fitted all the wiring to the sockets today and then got absorbed by this little time sponge:
Took best part of an hour to route the cable through the A pillar, clean up the switch and make a decent connection on the back covered in heat shrink as I don’t like the thought of a live wire possibly floating about in amongst all that bare metal.
I’m not sure the other side will be any quicker!
Goal for the end of this weekend is all the instruments in and as much of the harness properly in place as I can.