Machinist to bore and hone some 94mm cylinders to 95mm
Moderator: Miggs
Machinist to bore and hone some 94mm cylinders to 95mm
For 914 /T4 engine.
I have a set of 94mm barrels and 95mm pistons, I need the barrels bored out and honed to suit the pistons, I have the clearance spec.
Thanks
I have a set of 94mm barrels and 95mm pistons, I need the barrels bored out and honed to suit the pistons, I have the clearance spec.
Thanks
-
- I luv DDK!
- Posts: 779
- Joined: Fri Mar 31, 2006 10:54 am
- Location: Kendal CUMBRIA
- Contact:
-
- Me and DDK sitting in a tree! KISSING
- Posts: 2568
- Joined: Tue Oct 19, 2004 8:46 pm
- Location: Dorchester
Hi, as Mike says its an "old" style job. If the barrels are plated alloy its a bit more complicated but I don't know much about 914 motors.
I have a good contact on the South Coast for bore and hone on single iron barrels if that suits you geographicaly.
andy
I have a good contact on the South Coast for bore and hone on single iron barrels if that suits you geographicaly.
andy
ddk member# 1527
Austin Healey 100/6, 1957 Fast Road ( now sold)
75 2.7 S backdated to "r" and very light (now sold).
Adria Camper
Buddy McCrae kneeboard.
Friar Tuck kneeboard.
Lots of Bicycles.
Austin Healey 100/6, 1957 Fast Road ( now sold)
75 2.7 S backdated to "r" and very light (now sold).
Adria Camper
Buddy McCrae kneeboard.
Friar Tuck kneeboard.
Lots of Bicycles.
Give mike a call @ http://saundersmotorworks.com/ 023 8081 2101
They are old school so should be able to help you out.
If it's a T engine it should be all cast iorn.
They are old school so should be able to help you out.
If it's a T engine it should be all cast iorn.
Give mike a call @ http://saundersmotorworks.com/ 023 8081 2101
They are old school so should be able to help you out.
If it's a T engine it should be all cast iorn.
They are old school so should be able to help you out.
If it's a T engine it should be all cast iorn.
They are cast iron cylinders.
Plenty of type4 specialists around who can help.
Depending on what is convenient either:
Stateside tuning,
L.A.performance,
Or Laurie Pettit
Should be about to help (a google will get contact details for each)
To name the first three that came to mind (plenty others too)
Plenty of type4 specialists around who can help.
Depending on what is convenient either:
Stateside tuning,
L.A.performance,
Or Laurie Pettit
Should be about to help (a google will get contact details for each)
To name the first three that came to mind (plenty others too)