DDK - Die Deutschen Klassiker

Has the gearstick base shifted forward slightly on its slotted mounts, or the rear tunnel linkage worn _really_ badly? I had loads of problems getting the shift working correctly on my replica, mainly due to the alignment of the shortened (cut-and-welded) gear linkage rod. This was with 1st and 2nd,...

Here's a upside down photo of my 'for sale' set.
These were the first set I bought from ebay before managing to get hold of a set that mount via tenax fasteners on the body.



Simon

It has to be done, but then i'm biased! If you need a set of headlight grilles, I may have a set depending on which type you're after. (These are the mesh type that mount on the chrome headlight ring, rather than the body fitting tenax type I have fitted to my car) Don't forget to remove the bumpers...

The decklid was provided by Chesil, the kit manufacturer. I think it was the second one they'd made for a customer. Its an aluminium skin fitted over the standard GRP inner panel, as can be seen from the photo below BTW I documented the build of my car at http://www.hambly.org.uk/chesil http://www.h...

thanks! :D

engine is just a 1641cc at present. Twin kadrons, mallory cdi ignition