DDK - Die Deutschen Klassiker

Stopped the turn signal hosting moving in my 356. Initially I thought the bolts were too long so I shortened them but no. I cleaned out the inside and regreased then put some tape on the column. Hosting now solid. Just need to get the horn working now but can't get the pusher off https://uploads.ta...

Very well done.

Sent from my 22011119UY using Tapatalk

Thank you. I will try that but it was off last year when the steering box was rebuilt.

Sent from my 22011119UY using Tapatalk

I tried that but all I'm doing is damaging the push and boss I'm going to try and suction it. https://www.ebay.co.uk/itm/166365255153?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=1ViIsOGJRba&sssrc=4429486&ssuid=xFc-PSj2RR2&var=&widget_ver=artemis&media=COPY Sent fro...

Stopped the turn signal hosting moving in my 356. Initially I thought the bolts were too long so I shortened them but no. I cleaned out the inside and regreased then put some tape on the column. Hosting now solid. Just need to get the horn working now but can't get the pusher off https://uploads.tap...

The horn isn't working and the Porsche logo is upside down. I've tried pushing in a twisting. I've tried to get a very small screwdriver in to work it out? Any ideas?

Sent from my 22011119UY using Tapatalk

I've been thinking about patching the car in my A. I don't want to buy a full set but could only find this source for the carpet (that isn't a set). Any other ideas https://www.etsy.com/uk/listing/715665037/authentic-german-wool-square-woven?variation0=1116500176 Sent from my 22011119UY using Tapata...

I think you might want the normal gasket facing the exhaust? As that is the face which might not be true or move? Some uses sealant on there too. I have some spare exhaust gaskets if you need them

Sent from my 22011119UY using Tapatalk

Well done. We are aiming to head that way next month. St Malo to San Sebastian. Will be following for places to stop

Sent from my 22011119UY using Tapatalk

Sry my main take away from this is no dishwasher in the HillClimber house hold!

Sent from my 22011119UY using Tapatalk

After 12 short years I finally got my London 2012 banner (from the MTB events) up.

Sent from my 22011119UY using Tapatalk

Certainly not an Uber garage but £60 well spent to add matting to my garage/shed https://uploads.tapatalk-cdn.com/20240519/c8001b72cf399b3c52d1dd987fad0052.jpg https://uploads.tapatalk-cdn.com/20240519/4a924bfbf3b91c1b9a2cd68f58fc9fdf.jpg https://uploads.tapatalk-cdn.com/20240519/01207c19578260d83d3...

So a bad/no connection is what causes the temperature to move to the right so I don't think the sensor is connected to the gauge. First check that is just hasn't come disconnected. At the back of the gauge and more likely the engine bay (happened to me). If that doesn't solve the problem. I would co...

I polished and greased my balls ;) https://uploads.tapatalk-cdn.com/20240518/94803152cb0f61cb594f84523b7c1e7c.jpg Having already pulled the diff out… https://uploads.tapatalk-cdn.com/20240518/40fa3fb6ce081941c7f5f26273d5d5be.jpg Trying to find a noise that cut my Euro trip short! This is happening ...

I think you should of asked Mike Champion this question the other Sunday:). I think he has some software that will simulate/calculate this for you. As for if it's cost effective for you to ask or for Mike to answer this question is another question entirely

Sent from my 22011119UY using Tapatalk