DDK - Die Deutschen Klassiker

Been busy on the hillclimber's driveway today. Non Porsche was the ventilation blower motor seizing (nearly) on my leggy Skoda Superb, but got stuck-in and fixed it with some engine oil in the exposed fan shaft bearing. Temporary fix I think, but i need the car! Secondly, after a nice walk in the wo...

You can't really going to 3 angle your valve seats are you Rob?

and WHO would have a 50mm drill in the garage!?

And THAT is why it is important to do the survey which will take about 5 mins, that's all. It is full of this type of stuff, and I am sure the thinking at DVLA is not in our favor. These changes have to be challenged, I thought the DVLA and other depts around were Civil Servants not Civil Masters? I...

Tough decision, but I would have made that miles before, so well done for sticking it out.
Presume you ticked you way home from there?

PCGB is not a member of FBHVC.
I have been for several years now, they need people's support otherwise the DVLA will simply tear the classic vehicle interest apart.

I will be urging PCGB to join this week. Maybe another request to join will push things along.

I filled in my form and sent it off a few days ago. ANYONE with a classic vehicle should/must respond to ensure the DVLA/Gov is lobbied as hard as possible. The areas under discussion will affect anyone with an old vehicle in some way or other. Some new rules will come from this and may not be nice...

Yes, that is true, but need good clean contact of valve and seat to see where things sit. You can see where head prep takes so much time effort and money as you dig deeper. You need all this lot set correctly to shim each valve spring seat…possibly. I had to re shim my 3.2 in several places to get p...

I used to use one of those compressors, so awkward esp when re-assy of the collet halves. Use my motorcycle cheapie off ebay since (last 2 re-builds) and so much better, lighter and slimmer. As to the seats: I would not wright-off the seats until clean, clean the respective valves and do a simple la...

If nothing else Rob, I would ask Head Shop if they can do the case repair.
Mag alloy welding could be tricky to fix.

I would still fit the crank back in with new main bearings, lub with assy oil and bolt it all up. If it is tight you know for free the case is bent, the crank will be straight. Then you know you need to do more. The Head Shop can do all this for you Rob. They will insist on clean case halves, and wi...

Good reporting as ever.
Trips to remember for sure.
We are in north Italy at the Lakes, and the weather if all over the place.
Have to say great hotels and great food.

Not sure about the FIAT. Hybrid Panda…..

Ha!
Just read the way I detailed my post…
I’m on holiday, so slightly more disconnected than usual…

True, the dish washer is me.
I’m cheap and reliable and never break down.

Best cleaning for me has been paraffin, more paraffin, WD40. Bag after drying.
Brake cleaner and then more just before assembly..

I used to buy it off eBay 10 cans at a time.

Depends how you are physically of course, but I’ve had my 911/ 73T with a 3.2 in it for 34 years now. In those years it has done about 60k miles, hill climb suspension, full roll cage and racing seat with aftermarket for the wife. I installed 4 point harness for me when I hillclimbed it, but seat be...

On the 8th and 9th of June there will be 20 Porsches of all road going and modified twists at Loton Park speed hill climb close to Wales, nearest town is Shrewsbury. Easy to access via the A5 heading into Wales and in Shropshire. Food, beer and more there, bacon butties to write home about and even ...